CAUTION! Failure to obey these cautions could result in
!
minor or moderate injury.
Electrocution hazard
Before starting the cooling device, ensure that the power supply
line and the plug are dry.
Disconnect the cooling device from the power supply
– before each cleaning and maintenance
– after every use
Health hazard
Please check if the cooling capacity of the device is suitable for
storing the food or medicine you wish to cool.
Food may only be stored in its original packaging or in suitable
containers.
Opening the cooling device for long periods can cause signifi-
cant increase of the temperature in the compartments of the
device.
Clean regularly surfaces that can come in contact with food and
accessible drainage systems.
Store raw meat and fish in suitable containers in the device, so
that it is not in contact with or can drip onto other food.
If the device is left empty for long periods:
– Switch off the device.
– Defrost the device.
– Clean and dry the device.
– Leave the lid open to prevent mould developing within the
device.
NOTICE! Damage hazard
A
Check that the voltage specification on the type plate
corresponds to that of the energy supply.
Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the
vehicle
– Or with the AC connection cable to an AC power supply
Never pull the plug out of the socket by the cable.
If the cooling device is connected to a DC outlet: Disconnect the
cooling device and other power consuming devices from the
battery before connecting a quick charging device.
8
EN