8
Troubleshooting
Fault
Device does not
function, LED does
not glow.
When operating
from the DC outlet:
The ignition is on
and the device is not
working and the
LED does not glow.
9
Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
14
Possible cause
No voltage was
detected in the DC
power outlet.
No voltage present in
the AC power outlet.
The DC outlet is dirty.
This results in a poor
electrical contact.
The fuse of the DC
plug has blown.
The vehicle fuse has
blown.
Suggested remedy
In most vehicles the ignition must
be turned on before power will be
supplied to the DC power outlet.
Try using another plug outlet.
If the plug of your cooler becomes
very warm in the DC outlet, either
the DC outlet must be cleaned or
the plug has not been assembled
correctly.
Replace the fuse (5 A) in the DC
plug (fig. 3 1, page 5).
Replace the vehicle's DC outlet
fuse. Please refer to your vehicle's
operating manual.
EN