Taking the cooling device out of operation
➤ Slide the switch (fig. 2 3, page 4) to the "OFF" position.
➤ Disconnect the device from the voltage supply.
I
NOTE
If you are not going to use the cooling device for a long time, leave
the door slightly ajar to prevent unpleasant odors building up.
7
Cleaning and maintenance
A
NOTICE! Damage hazard
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
EN
13