Backup - Pioneer SGX-CA500 Mode D'emploi

Backup

EN
Backup creates backup data for system and application
settings.
You can use backup data to restore the system after
initializing it following a system error, etc.
• If the device is connected to the PC with the USB cable,
disconnect it before performing a backup. If the device is
logging, stop logging and save the log data.
• For information about what data is backed up, refer to
"Initialized, Backed Up, and Restored Data" under "Initialize"
(Ü page 53).
• Riding log data is not included in backed up data. Save
riding log data separately to a PC.
Ü Transferring the Data (page 26)
1
On the home screen, tap the [Settings] icon.
This displays the settings menu.
2
Tap [System] - [Setting Manager] - [Backup].
This will display a confirmation message asking if you
want to create backup data.
3
Tap [OK].
This starts backup data creation.
The message will appear when the backup data is
created. Tap [OK] to exit backup.
54
4
Connect the device to your PC.
Connect the provided USB cable to a computer's USB
connector.
For information about connections, refer to "Charging the
Device" under "Charging" (Ü page 6).
5
Save the backup data where you want on the
PC.
The backup data is stored in the device built-in flash
memory in a folder named "\Pioneer\Setting\".
• Note that backup data stored in device flash memory is
deleted whenever the device is initialized. Be sure to save
the backup data to a PC or other media.