Checking Accessories/Part Names And Functions; Accesories; Part Names And Functions; Front View - Pioneer SGX-CA500 Mode D'emploi

Checking Accessories/Part Names and Functions

Accesories

This product contains the following parts.
• Main unit
• Bracket / Sheet
• Before mounting the bracket, attach the sheet to the inside
of the clamp.
• USB cable
• Strap
• Quick Start Guide
• Important Information for the User
• Warranty Card

Part Names and Functions

■

Front view

Display (touch panel)
Touch the screen directly to select an item or change
screens.
[LAP] button
Press the [LAP] button during logging to record the lap.
Press the [LAP] button for more than 2 seconds to reset
the timer and record the log.
Ü Saving Log Data (page 21)
[START/STOP] button
Press the [START/STOP] button to start or stop logging.
Press the [START/STOP] button for more than 2 seconds
to turn the power on or off.
[MENU] button
Press the [MENU] button to display the menu screen.
Press the [MENU] button on the menu screen to close
the menu screen.
Press the [MENU] button while the touch panel is locked
to unlock it.
Press and hold the [MENU] button to go back to the
previous screen.
Press the [MENU] button on the main screen of the
applications to display the home screen of the device.
■
Back View
USB connector cover
Securely close the USB connector cover when not
charging the battery or transferring data to your PC.
USB connector
Connect the USB cable to charge the device or transfer
data to your PC.
Buzzer
Provides a buzzer sound for alerts and input
confirmation.
Air pressure sensor
Do not block the sensor or the device will not operate
properly.
Bracket installation slot
Use the bracket installation slot to attach the device on
the bracket fixed to the bike.
EN
5