How To Use - Hamilton Beach Professional 63240 Mode D'emploi

How to Use

w CAUTION
Entanglement Hazard.
Unplug mixer before inserting or
removing attachments. Failure
to do so can result in broken
bones or cuts.
Before first use: Wash bowl
and attachments in warm,
sudsy water; rinse and dry.
Always unplug Mixer from
electrical outlet before inserting
or removing attachments.
4. Insert attachment onto Bowl
Attachment Shaft and press
upward as far as possible. Turn
attachment counterclockwise,
hooking attachment over Bowl
Attachment Shaft Pin.
1. Always make sure Mixer
is unplugged and Speed
Control Dial is set to OFF ( ).
5. Turn Mixer Release Lever
clockwise and lower Mixer
Head down into position.
2. Turn Mixer Release Lever
clockwise and tilt Mixer Head
up. Lever will automatically
move counterclockwise
when Mixer Head is fully
raised.
6. Place Splash Collar around
edge of Bowl. Insert Pouring
Shield Tabs into slots on
Splash Collar.
3. Align Bowl handle with
and turn clockwise until locked
in place ( ).
7. Plug into outlet. Add
ingredients to Bowl and
select desired speed.
5