Mounting The Accessory Tray; Attaching The Bottle Opener; Attaching The Lid Handle - Louisiana Grills LG Série Guide D'utilisation

8. MOUNTING THE ACCESSORY TRAY

Parts Required:
1 x Accessory Tray (#12)
Installation:
• Remove the four stainless steel screws from the front panel fo the
main grill. Using the same screws, refasten the top two corners of the
accessory tray to the front of the grill. To secure the bottom, insert a
screwdriver into the holes provided and secure.
NOTE: Avoid storing items in the tray for long periods of time, as the
accessory tray will become warm when using the grill and may cause
some items to melt.

9. ATTACHING THE BOTTLE OPENER

Parts Required:
1 x Bottle Opener (#20)
2 x Screw (#B)
Installation:
• Secure the bottle opener to the front of the grill using two screws on
the support brace.

10. ATTACHING THE LID HANDLE

Parts Required:
1 x Lid Handle (#9)
2 x Lid Handle Bezel (#8)
Installation:
• Remove the pre-installed screws from the lid handle. From inside the
barrel lid, insert one screw so that it protrudes to the outside. Add a
bezel on the screw, then hand-tighten the screw (from the inside) into
the lid handle. Repeat same installation for other end of lid handle.
NOTE: Do not over-tighten screws. Only a snug fit is necessary.
10
8
9
10