Marmitek CM-USB Guide Utilisateur page 4

ENGLISH
Changing the COM port setting
If the CM-USB has been installed on a different COM port than COM1, 2, 3 of 4, you need to
change the setting:
a. Right click "My Computer" on your desktop and select Properties.
b. Select the Hardware tab.
c. Select Device Manager.
d. Open the folder "Ports COM & LPT".
"Prolific USB-to-Serial COMM port" will be shown in the list of devices (Figure 1).
e. Select Profilic USB-to-Serial COMM port en then Properties.
f. Select the Port Settings tab (Figure 4).
g. Click Advanced.
h. In the windows Advanced, use the option box COM port number to choose a different COM-
port (Figure 5). Select a COM port that is not used in the list "Ports COM & LPT" (Figure 1).
In some versions of Windows (98, ME) it is not possible to change the COM port number in the
Advanced window. If this is the case, remove the other applications that use the COM3 or
COM4 port from your system and then install CM-USB. CM-USB will automatically choose
COM3 or COM4. You can reinstall your own applications after installing CM-USB.
More questions? For an up-to-date list of frequently asked questions about this product, visit
www.marmitek.com > customer service.
Compatibility
Windows 98SE, ME, 2000 and Windows XP
USB version 1.1 and higher
ActiveHome version 1.42
Connects directly to all CM11 computer interfaces
4
Figure 4
Figure 5
MARMITEK