Safety Warning - Marmitek CM-USB Guide Utilisateur

ENGLISH

SAFETY WARNING

• To prevent short circuits, this product (except the outdoor camera) should only be used inside and only
in dry spaces. Do not expose the components to rain or humidity. Do not use the product close to a
bath, swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright light sources.
• Do not open the product: the device contains live parts. The product should only be repaired or
serviced by a qualified repairman
• In case of improper usage or if you have opened, altered and repaired the product yourself, all
guarantees expire. Marmitek does not accept responsibility in the case of improper usage of the
product or when the product is used for purposes other than specified. Marmitek does not accept
responsibility for additional damage other than covered by the legal product responsibility.
INTRODUCTION
The Marmitek CM-USB allows you to use Marmitek ActiveHome and the CM11 computer interface via
the USB port of your PC! The Marmitek CM-USB supports all the functions of the ActiveHome software.
INSTALLING THE CM-USB
Warning: Install the software before you connect the CM-USB to your PC!
1. Install the CM-USB software. Use the file "Setup.exe".
You can download the most recent version of the software from: www.marmitek.com > customer service
2. Follow the instructions on your screen.
3. After installing the software, connect the
CM-USB cable to the PC. Your PC will
automatically recognise the CM-USB cable
("Prolific USB-to-Serial COMM port").
4. You should now check which settings were
selected for the CM-USB cable:
a. Right click "My Computer" on your
desktop and select Properties.
b. Select the Hardware tab.
c. Select Device Manager.
d. Open the folder "Ports COM & LPT"
(see Figure 1). "Prolific USB-to-Serial
COMM port" will be shown in the list of
devices.
e. In this window you can see (between
brackets) what COMM port the CM-USB
is installed at. (COM1, COM2, COM3 or
COM4). See "Changing the COM port
setting" if there a different port is
indicated, other than COM1, COM2,
COM3 or COM4.
f. Write down the setting. You need this
information to install ActiveHome.
2
Figure 1
MARMITEK