Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12

Using the appliance

Warning! Never cover the appliance during operation. This could
lead to heat accumulation or fire and damage to your appliance.
Make sure no water can drop into the appliance.
166
EN
Switch On/Off
Press ON/OFF button (E). The display
(H) shows the current humidity level
in the room.
Mode
Press MODE (F) to switch between
automatic and continuous dehumidi-
fication.
Setting humidity level
Ensure that the appliance is in Auto
mode. Press Humidity setting mode
button (G) to set the desired humid-
ity level. The appliance will start
to work until the desired level is
reached.
Fan speed
Press Fan speed button (B) to switch
between high and low dehumidifica-
tion.
Set timer
Ensure that "inside drying" is not
activated. To set a particular amount
of hours, press TIMER (D)."1" blinks
on the display. Set the time you wish
the appliance to operate between 1
and 24 hours.
Inside drying
Ensure that the timer is not activat-
ed. Press inside drying button (C) to
dry the inside of the appliance.
To turn off the inside drying function
press the drying button (C) again.
The compressor will stop working
and will restart 3 minutes later.
Empty the container
If the water level control (A) lights
up and the display shows "FL", the
water tank needs to be emptied (see
"Empty the water tank")
Placement guidelines
The dehumidifier should be used in
≥ 40 cm
closed rooms for efficient work.
When operating the appliance,
keep doors, windows and other
openings closed.
Make sure to maintain distances of
40 cm upwards and 50 cm side-
≥ 50 cm
swards for free air circulation
≥ 50 cm
The dehumidifier can support dry-
ing laundry. Make sure to maintain
≥ 50 cm
≥ 50 m
distances of ≥50 cm on all sides to
the wet laundry.
Do not operate the dehumidifier
near dryers, heaters or radiators.
EN
167

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

67725316808916

Table des Matières