Madeira Barines 30 L Mode D'emploi page 83

Empty the water tank
1
Carefully pull out the water
tank 4 to avoid spilling water.
Caution! If water appears to be in-
side the appliance, empty the wa-
ter tank and let the appliance dry.
Use the condensation drain
1
Condensation water can per-
manently be derived with a
drainage hose.
Remove the screw cap and the
rubber plug on the rear side of
the appliance.
3
Make sure that the hose is at-
tached firmly and ensure an
unhindered water drain.
Note: Remove drainage hose
and apply rubber plug and
screw cap when the condensa-
tion drain is not in use.
Switch on
1
Insert the power supply cord
7 into a suitable wall socket.
Press the on/ off button E to
switch on the dehumidifer.
Caution! Do not plug the appliance
into a multiple socket with other
devices.
Remove intake grille
1
For cleaning the intake grille 9
(see "Care and Maintenance"),
push the two flaps holding it
and remove it.
164 EN
2
Empty and reinstall the water
tank 4. Make sure it is installed
properly.
2
Insert the drainage hose into
the condensation drain 8.
Switch off
2
Press the on/ off button E on
the control panel 1 to switch
off the appliance.
Note: Wait 3 minutes until
switching on the appliance
again.
Install intake grille
2
Push the intake grille 9 gently
onto the housing until it clicks
into place.
1 1
1 1
3 3
1 1
1. 1.
1 1
1. 1.
2. 2.
2 2
2 2
2 2
2 2
EN 165