Thorough Cleaning - Cembre B-TC04 Notice D'utilisation Et D'entretien

Table des Matières

Publicité

12V ÷ 14.4V DC
93
92
25
FIG. 2
EXTERNAL SUPPLY
ALIMENTATION EXTERIEURE
EXT. ENERGIEVERSORGUNG
ALIMENTACION EXTERNA
ALIMENTAZIONE ESTERNA
20
26
FIG. 3
STORAGE CASE
RANGEMENT
LAGERUNG
ALMACENAMIENTO
CUSTODIA
34
3. WARNING
T
HE TOOL IS UNSUITABLE FOR CONTINUOUS USE AND SHOULD BE ALLOWED TO COOL
DOWN FOLLOWING UNINTERRUPTED
EXHAUSTED A FULLY CHARGED BATTERY IN ONE SESSION
.
MENT FOR A FEW MINUTES
O
BSERVE RECOMMENDED REST PERIODS ALSO WHEN USING AN EXTERNAL POWER
.
SUPPLY
D
O NOT USE THIS TOOL ON LIVE CABLES
P
ROTECT THE TOOL FROM RAIN AND MOISTURE
. E
-
AND BATTERY
LECTRO
HYDRAULIC TOOLS SHOULD NOT BE OPERATED IN POURING
.
RAIN OR UNDER WATER
3.1) Using the battery charger
Carefully follow the instructions in the battery charger manual.
3.2) General information on how to use batteries
In order to use the batteries correctly, please follow these rules:
– Use the battery until the automatic residual energy display still has 1-2 leds showing: this
means the battery is almost completely discharged and no loss in the life of the battery has
been caused.
– Be particularly careful when charging the new battery the fi rst 2-3 times in order to be certain
of maximising the available energy level.
– Allow the battery to cool down to ambient temperature prior to recharging.
– Rest the battery charger for at least 15 minutes between charges.
4. MAINTENANCE
The tool is robust, completely sealed, and requires very little daily maintenance.
Compliance with the following points, should help to maintain the optimum performance of
the tool:

4.1) Thorough cleaning

Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be cleaned with a clean cloth, taking care to remove any
residual, especially close to pivots and moveable parts.
4.2) Storage
(Ref. to Fig. 3)
When not in use, the tool should be stored and transported in the metal case, to prevent
damage. Metal case: "VAL B-TC04" size: 566x410x130 mm (22.3x16x5.1 in.), weight: 6,7
kg (14.8 lbs).
7
,
;
SUCCESSIVE OPERATIONS
FOR INSTANCE
,
DELAY BATTERY REPLACE
.
. W
ATER WILL DAMAGE THE TOOL
ENGLISH
,
HAVING
-

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

B-tc04a

Table des Matières