ResMed AirFit N30 Mode D'emploi page 9

Storage and transport temperature: -4°F to 140°F (-20°C to +60°C)
Storage and transport humidity: up to 95% RH non-condensing
Service life: The service life of the mask system is dependent on the intensity of usage,
maintenance, and environmental conditions to which the mask is used or stored. As this
mask system and its components are modular in nature, it is recommended that the user
maintain and inspect it on a regular basis, and replace the mask system or any
components if deemed necessary or according to the 'Visual criteria for product inspection'
in the 'Caution' section of this guide.
Note: The manufacturer reserves the right to change these specifications without notice.
Storage
Ensure that the mask is thoroughly clean and dry before storing it for any length of time.
Store the mask in a dry place out of direct sunlight.
Disposal
This mask does not contain any hazardous substances and may be disposed of with your
normal household refuse.
Reprocessing the mask between patients
Only Sleep Lab Mask (SLM) variants of the mask system are intended for multi-patient re-
use. When using between patients, these masks must be reprocessed according to
instructions available on ResMed.com/downloads/masks.
Symbols
The following symbols may appear on your product or packaging:
Nasal cradle mask
QuietAir vent
Size - medium
Caution, consult accompanying documents.
Prescription only (In the US, Federal law restricts these devices to sale by or on
the order of a physician.)
See symbols glossary at ResMed.com/symbols.
8
Device setting - Pillows
Size - small
Size - small wide