Philips 8200 Série Mode D'emploi page 17

4222.002.4998.2.indd 19
Never immerse the Jet Clean System in water nor
rinse it under the tap.
2 Simultaneously press the release buttons on
both sides of the Jet Clean System (1). Then lift
the Jet Clean System off the cleaning chamber
(2).
,
The cleaning chamber remains behind.
3 Pour any remaining cleaning fluid out of the
cleaning chamber.
You can simply pour the cleaning fluid down the sink,
this is not harmful to the environment.
4 Rinse the cleaning chamber under a hot tap.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
The cleaning chamber is not dishwasher-proof.
5 Fill the cleaning chamber with HQ200 cleaning
fluid up to the MAX indication.
Note: Make sure the cleaning chamber is always filled
above the MIN indication.
6 Place the Jet Clean System back onto the
cleaning chamber.
Make sure that the release buttons snap back into
place.
Cleaning the shaving unit under the tap
1 Switch off the shaver and disconnect it from
the mains.
ENGLISH
19
27-02-2009 11:34:23