Samsung 4+ Série Mode D'emploi page 220

The check list for wired network connection failure
When wired network connection failed, try to apply the following information to
each issue.
Issues
No network cable
found.
IP auto setting failed.
◀
• Check that your network cable is plugged in.
• If it is connected, make sure that the router is turned on; if it is on, try
turning it off and on again.
Try the following to set your IP address automatically or set your IP address
manually by selecting IP
• Ensure DHCP server is enabled on router and unplug and re-plug-in the
router.
• Contact your Internet Service Provider for more information.
English
Solutions and Explanations
Settings.
▶