Panasonic WX-CT2020 Manuel D'instructions page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

q Battery Lock [EJECT]
When removing the battery, slide out the lock.
When loading a new battery, insert the battery until the
lock clicks.
w A/B Channel Selection Button [A/B]
This button switches frequencies from Channel A to B
and vice versa. The channel indicator y displays the
selected channel in red (A) or green (B).
e Page Button [P]
This button controls communications with store person-
nel.
While the button is held down in the Page PTT mode,
you can speak to store personnel. When the button is
pressed in the Page Lock mode, you can speak to the
store personnel until you press a button a second time.
When the button is released, you can hear the commu-
nication among store personnel.
r Talk Button [T]
This button controls communications with the customer.
While the button is held down in the Talk PTT mode, you
can speak to the customer who is at the menu board.
When the button is pressed in the Talk Lock mode, you
can speak to the customer until you press the button a
second time.
When the button is released, you can hear the cus-
tomer.
t Power Indicator
The indicator shows the status as follows.
Green ON: Power is supplied, and the unit is oper-
ating.
Red ON: The battery requires recharging.
Red Blink: The channel selector (refer to p. 7) is set
to a wrong position.
y Channel Indicator
While lighting in red or green, this indicator shows
which channel is in operation.
Red lighting: Channel A is selected.
Green lighting: Channel B is selected.
Red blinking: Channel A is being selected, and either
the Talk or Page mode is activated.
Green blinking: Channel B is being selected, and
either the Talk or Page mode is activated.
u Volume Control Buttons [VOL +, –]
Pressing the respective buttons will increase or
decrease the sound level.
i Power Button
Pressing this button for one second will turn the order
taker unit on or off.
o Earphone Input Jack
This jack is used for connection with WX-C1027A
Headset.
!0 Microphone Input Jack
This jack is used for connection with WX-C1027A
Headset.
!1 Switch Pocket
Do not open the lid of this pocket. Should be opened
only by qualified service personnel or system installers.
!2 Battery (Optional accessory)
Refer to p. 3 PRECAUTIONS.
5

Publicité

Chapitres

Table des Matières
loading

Table des Matières