Remote Control; Use And Operation - Klarstein Metrobreeze Rom Mode D'emploi

POWER: Press this button to turn on/off the
air conditioner.
TIMER: Press this button to set timer.
SWING: Press this button, and the horizontal
guide vane rotates automatically.
TEMPERATURE CONVERSION: Tempera-
ture is converted from °C to °F.
COOL: Press this button to select COOL
mode.
HEAT: Press this button to select HEAT
mode.
DEHUMIDIFY: Press this button to select
DEHUMIDIFY mode.
FAN: Press this button to select FAN mode.
UP/DOWN: Press UP or DOWN to set tempe-
rature or adjust timer.
HIGH: Press this button to select HIGH
speed.
MID: Press this button to select MID speed.
LOW: Press this button to select LOW speed.
SLEEP: Press this button to set SLEEP mode.
At the moment the speed of upper and lo-
wer fans is fixed at LOW speed, in SLEEP
mode temperature and speed cannot be
changed. Press this button again to cancel.
Setting of timer off
When the air conditioner is running, press this button, the timer LED lamp is on, and meanwhile 88 Nixie tube
will flicker "00" for 5 times, at the moment, press UP and DOWN to adjust time from 1h to 24h. Between
1~24h of timer, up/down adjustment once changes 1h. When the set time expires, the air conditioner turns
off automatically.

Remote Control

Use and Operation

Single cool
remote control
Cool and Heat
remote control
18