Installation - Klarstein Metrobreeze Rom Mode D'emploi

Important Hints on Use
• When full water indication is displayed, the air conditioner will stop work, you should drain water in time.
After drainage the air conditioner will start automatically.
• In DEHUMIDIFY and FAN (including the internal dry function) modes, you need not use exhaust pipe.
• If your room faces the sun directly, please draw the curtains.
Location
Install in a flat and dry place, and 50cm must be left around the
air conditioner to enable smooth circulation of air, as shown in Fig.5
(before connection of exhaust pipe).
Assembly method of exhaust pipe
• Connect exhaust pipe assembly with round joint.
• Fix the round end of the connected exhaust pipe assembly at air
outlet of the air conditioner as shown in figure.
• Connect the oblate joint of the connected exhaust pipe assembly
with sealplate of window.
• Install sealplate on the nearest window. No Obstacles at a dis-
tance of 50cm around the Window should be ensured to guaran-
tee unimpeded air exhaust.
Cautions
• Exhaust pipe is 60cm~170cm long (including adapter). We recommend using the minimum length so as
to save energy for you.
• The length of exhaust pipe is especially designed in accordance with the specification of the air conditioner.
Please do not use other exhaust pipes of different lengths or materials, in such way failure may be caused.

Installation

20