Remote Control; Installing The Castors - Klarstein Iceberg Pure Mode D'emploi

Enfriador de aire
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
24

REMOTE CONTROL

Notes on using the remote control
1. The remote control must be pointed towards the receiver.
2. If the remote control is pointed at the receiver on the appliance, the range is
5 metres maximum. If the remote control is not pointed at the receiver, the range of
the remote control is reduced.
3. Do not place anything between the receiver and the remote control.
4. Keep the remote control in a safe place so that it does not fall and break.
5. When you are not using the remote control, remove the battery and store it safely.
Inserting the battery in the remote control
1. The cover of the battery compartment can be removed by gently pulling it down.
2. Insert the battery into the battery compartment. Pay attention to the negative and
positive poles of the battery.
3. Replace the cover of the battery compartment and fasten it properly.

INSTALLING THE CASTORS

Remove the four castors from the package. The appliance must not be filled with
water or ice. Carefully turn the air cooler upside down. Insert the four castors into the
corresponding holes in the bottom of the appliance and press the castors firmly into
place to secure them. Then place the appliance on the castors and align it so that it is
stable.
negative (-)
positive (+)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

10035856

Table des Matières