Philips Bodygroom 3000 Série Mode D'emploi page 11

Shaving
Shaving with the back shaving attachment (BG2038, BG2036
only)
2
1
1 If a trimming comb is still attached, remove it.
Note: You can either push the trimming comb off the appliance or pull it
off, depending on how the comb is placed on the appliance.
2 Press the on/off button once to switch on the appliance.
3 Place the shaving unit on the skin.
4 Move the appliance against the direction of hair growth with one hand,
while you stretch the skin with the other hand.
Note: Make sure that the shaving unit is always fully in contact with the
skin.
Note: The back shaving attachment is suitable for both wet and dry use.
1 Press and hold the release button (1) and open the back shaving
attachment (2).
2 Place the bottom of the appliance in the lower part of the holder of the
back shaving attachment. Then press the top against the top part of the
holder until it locks into position with a click.
3 Shave your back by moving the back shaving attachment with the
appliance up and down by its handle.
English
11