App Operation - Furrion DV3300S-BL Manuel D'instructions

Operation
4. To accept a call:
When there is an incoming call, press
to accept the call.
5. To reject a call:
When there is an incoming call, press
to reject the call.
6. To end a call:
During a call, press
Note: When there is an incoming call, the
calling number will be displayed on the
screen of DV3300S.
Play an audio file from another
Bluetooth device to DV3300S
"LINK OK" is displayed when DV3300S is paired
and connected with another Bluetooth device.
If the Bluetooth device supports A2DP, you can
stream music from the Bluetooth device to
DV3300S for playback.
To play audio through Bluetooth, you must
activate Bluetooth mode on your mobile device.
If the Bluetooth device supports AVRCP, you can
use the basic audio playback control functions
(such as play/pause) from DV3300S.
Note: In other modes (except during a call
via Bluetooth), press
switch between different modes.
Set up Bluetooth connection using
NFC (only supporting mobile phones
with NFC function)
1. Enable the NFC function of your mobile
phone and make sure the screen is active
and unlocked.
2. Move your mobile phone towards
DV3300S so that the NFC detection area
on your mobile phone touches that on
DV3300S. You can now connect your
mobile phone with or disconnect it from
DV3300S conveniently.
Note: For first-time pairing and
connection, you will be asked to enter a
password. Please enter "0000".
29
to end the call.
on the front panel to

App Operation

With the Furrion ES control App (either
Android or iOS version), you can use your
mobile device as a remote control.
The App uses BT Low Energy (BLE)
technology to connect to DV3300S
instead of infrared in the physical remote
control, thus getting free of line-of-sight
connection.
While the App checks for compatibility,
you can cross-check the specifications
of your mobile device to see if it supports
BLE technology before installation.
Find and download "Furrion ES Control"
from Google Play (Android) or App Store
(iOS) on your mobile device. Run the App
as instructed.
The App works with various models in the
Furrion DV range entertainment system.
Install and use the App
1. Install the ES Control App on your mobile
phone.
2. Enable Bluetooth on your mobile phone,
and run the APP.
3. Select the device name "DV3300S-4.0-
XXXX"(for iPhone) (where X can be any
character of A-Z or number 0-9) to
connect.
4. Use the available functions on the App to
control DV3300S freely.