Set Up The Dvd System Menu - Furrion DV3300S-BL Manuel D'instructions

Operation
2. Not all USB products can be charged from
the unit.

Set up the DVD System Menu

1. Press SETUP on the remote control to access
the DVD System Menu on the TV screen.
There are 6 setup pages in total.
2. Press / to select a desired setup page.
3. Press / to select a setup item on the
selected setup page.
4. Press to enter the setup item.
5. Press / to select an option for the
setup item, and then press OK to confirm.
Press to return to the upper level.
Press SETUP on the remote control again
or use the navigation buttons to highlight
EXIT SETUP and then press OK to exit the
System Menu.
The 6 setup pages of the DVD System Menu
are as follows:
System Setup
1. TV SYSTEM
The unit supports output of various TV
systems.
If your TV only supports NTSC or PAL
system, the screen will blink and become
colorless when the wrong TV system is
selected. In this case go to TV SYSTEM
and select NTSC, PAL or AUTO to match
the system of your TV.
2. RESOLUTION
Select the resolution level.
3. TV TYPE
Select an option below to match your TV
screen size.
25
4:3 PS: Choose the item when connecting
a TV set with 4:3 screen. When playing
pictures of 16:9 size, the left and right
parts of the video will be cut out, and
displayed on full screen.
4:3 LB: Choose the item when connecting
a TV set with 4:3 screen. When playing
pictures of 16:9 size, the top and bottom
parts of the TV screen will be turned into
a black square respectively.
16:9: Choose the item when connecting a
TV set with 16:9 wide screen.
4. PASSWORD
Lock or unlock the rating level of Parental
Control.
The default state is locked, and the
default password is 0000.
You can set a new password that you like:
Select PASSWORD and then press
enter the setup item.
Input the original password 0000, and
then press OK to unlock it.
Press to enter the setup item again,
then input a new password that you like
and finally press OK to confirm.
5. RATING
Set a new rating level for Parental Control.
Select PASSWORD and then press
enter the setup item.
Input the set password, and then press
OK to unlock the rating level setting for
Parental Control.
Select RATING and then press
the setup item.
Use the navigation buttons to select your
desired rating level, and then press OK to
confirm.
Select PASSWORD again and then press
to enter the setup item.
Input the password and then press OK
to lock the new rating level setting for
Parental Control.
6. DEFAULT
Reset all settings to their original status.
to
to
to enter