Bluetooth Operation - Furrion DV3300S-BL Manuel D'instructions

Operation
Appendix: Region code of DVD
The Motion Picture Association of America
(MPAA) divided the world into 6 regions,
and allocated every region a code, named
the region code. The region codes and the
countries or areas represented by the region
codes are as follows:
Region I: America, Canada, East-Pacific
Islands;
Region 2: Japan, West Europe, North Europe,
Egypt, South Africa, Middle East;
Region 3: South-east Asian countries
including Taiwan, Hong Kong,
South Korea, Thailand, Indonesia,
etc.;
Region 4: Australia, New Zealand, Central
South America, South Pacific
Islands;
Region 5: Russia, Mongolia, Indian Peninsula,
Middle Asia, East Europe, North
Korea, North Africa, North-west
Asia etc.;
Region 6: China mainland.

Bluetooth Operation

Pair DV3300S with your mobile
phone
1. Activate Bluetooth mode on your mobile
device. Then press
DV3300S to enter pairing mode.
2. When DV3300S is detected by your
mobile phone, the device name FURRION
DV3300S-BL-XXXX (where X can be any
character from A-Z or number from 0-9)
is shown on your mobile phone.
3. Select the device name on your mobile
phone, then an input box will pop up,
asking you to input a password.
4. Input 0000 and confirm. Upon successful
pairing and connection, 'LINK OK' will
appear on the LCD of DV3300S.
on the front panel of
Note:
1. Some mobile phones support automatic
re-connection after first-time pairing
with DV3300S. Some other mobile phones
may need you to select the device name
(FURRION DV3300S-BL-XXXX) from the
list of paired Bluetooth devices to confirm
re-connection.
2. In case of casual disconnection, select
the device name (FURRION DV3300S-BL-
XXXX) from the list of paired Bluetooth
devices to confirm re-connection.
Disconnect / unpair DV3300S from
your mobile phone
1. To disconnect:
On your mobile phone, select the
connected device name (FURRION
DV3300S-BL-XXXX) from the list of
paired Bluetooth devices and confirm
disconnection.
2. To unpair:
Press and hold
DV3300S for about 5 seconds to clear the
pairing information.
Operate your mobile phone via
Bluetooth
When the Bluetooth connection is ready, the
call you make or receive will be transferred
from your mobile phone to DV3300S.
1. When connected: Use controls on your
mobile phone to switch sound output
between DV3300S and the mobile phone.
2. To dial a number with the remote control
of DV3300S:
Use number buttons 0-9 to enter a
telephone number.
* You can press CLEAR to cancel a wrong
input if necessary.
Press to call out.
3. To redial a number:
Press to show the last dialed number
on the LCD and call out.
on the front panel of
28