Operation; Quick Reference Guide - Furrion DV3300S-BL Manuel D'instructions

Operation

Quick Reference Guide

Power on/off, switch
to standby mode
Mute
Select a source
Adjust volume
Select a feature /
setting
Select a preset EQ
Set clock
Turn on / off loudness
effect
Select speakers
Reset
Accept or make a call
Reject or end a call
General Operation
Press to turn the unit on or enter standby mode.
Press and hold to turn the unit off.
Press MUTE on the remote control to mute sound. The icon
display.
Press MUTE again to restore the sound.
Press once or more to select Tuner, Disc (with a disc loaded), USB (with a
USB storage device connected), BT, ARC, AV IN and AUX mode.
VOLUME -/+ knob
Rotate the
1. Press SEL on the remote control once or more to select VOL, BAS (without EQ
preset), TRE (without EQ preset), BAL, EQ, or BEEP.
VOLUME -/+ kn
2. Rotate the
Press EQ on the remote control once or more directly, or press the
-/+ knob
on the front panel to activate EQ mode and then rotate the
-/+ knob
to select EQ, CINEMA, ROCK, CLASSIC, or FLAT. The sound effect will
change accordingly.
1. Press and hold CLOCK on the remote control to enter clock setup mode.
VOLUME -/+ knob
2. Rotate the
VOLUME -/+ knob to enter minute setting.
3. Press the
4 VOLUME -/+ knob
. Rotate the
The time on the clock is set automatically after a few seconds of inactivity.
Press and hold LOUD on the remote control to turn on or off the loudness sound
effect.
Press and hold ZONE 1 / ZONE 2 to select speaker output.
The corresponding zone number will be displayed on the LCD once selected.
Press RESET with a sharp object to reset the unit and load its factory default
settings.
Bluetooth Operation
Press to accept an incoming call, or dial or redial a telephone number.
Press to reject or end a call.
to adjust volume.
ob on the front panel to select a feature / setting.
to adjust the hour.
to adjust the minute.
flashes on the
VOLUME
VOLUME
16