Program Playback - Furrion DV3300S-BL Manuel D'instructions

Operation
Change the caption language
When playing DVDs, press SUBT on the
remote control once or more to select the
caption language or turn off the caption (if
available).
Note: This function is unavailable for VCD/
MP3/WMA/CD discs.
Change the audio language
When playing DVDs, press AUDIO on the
remote control once or more to select the
desired language type (if available).
When playing VCD discs, press AUDIO on
the remote control once or more to select
MONO L, MONO R, or Stereo (no language
function).
For CD/WMA/MP3, the AUDIO button is
invalid.
Check the playback status
When playing DVD/VCD/CD discs, press OSD
on the remote control once or more to turn
on or off playback status display.
For DVD discs, this function allows you
to check such information as the current
title and chapter numbers, and the
elapsed and remaining time of both the
current title and chapter etc.
For VCD/CD discs, this function allows
you to check such information as the
current track number, and the elapsed
and remaining time of both the current
track and the whole disc.

Program playback

This function allows you to play some titles /
chapters / tracks on a DVD/VCD/MP3/WMA/
CD disc in your specified order.
1. During playback, press PROG on the
remote control to enter a program
interface as follows:
23
For DVD/MP3/WMA
For VCD/CD
2. Use the navigation buttons to move the
cursor onto the desired place for inputting
the sequence number.
3. Use the number buttons to input the title
/ chapter / track sequence numbers you
want in your desired order.
4. Press directly, or use the navigation
buttons to move the cursor onto PLAY,
and then press OK on the remote control
to play the programmed titles / chapters /
tracks in the programmed order.
To exit program playback, press
followed by , or press PROG twice
again.
To remove all programmed sequence
numbers, move the cursor onto CLEAR,
and then press OK on the remote control.
To change the programmed sequence,
move the cursor onto the item you want
to change, and then input the desired
sequence number.
During VCD playback with PBC enabled,
PBC will be disabled when you enter
program playback.