emerio HV-111712 Mode D'emploi page 6

HV-111712
PARTS DESCRIPTION
1. Main unit
2. Dust cup
3. Extension tube
4. Floor brush
5. Textile nozzle
6. Crevice nozzle
7. Round brush
8. On/off button
9. Handle
10. Dust cup release button
11. Connection tube release button
12. Connection tube
13. Suction hole opening
14. Locking clip
USE
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories.
1. Insert the connection tube into the suction hole opening; make sure it fits firmly. You can also press and
hold the connection tube release button to remove it from the suction hole opening.
2. Connect different nozzle tools / brushes onto the connection tube for different cleaning purposes.
When connect the floor brush, please connect the extension tube first.
Assemble the floor brush before use: Insert the adapter (A) into the brush hole (B) and fix with the clip (C).
The floor brush has two positions, one for hard and one for soft/textile surfaces – Choose the right one.
- 5 -
EN