LG G Pad III 8.0 FHD Mode D'emploi page 24

3. Before installing an open source application and
OS
WARNING
If you install and use an OS other than the one provided by the manufacturer it
may cause your device to malfunction. In addition, your device will no longer be
covered by the warranty.
To protect your device and personal data, only download applications from
trusted sources, such as Play Store™. If there are improperly installed
applications on your device, the device may not work normally or a serious
error may occur. You must uninstall those applications and all associated data
and settings from the device.
4. Using the Hard Reset (Factory Reset)
If your device does not restore to its original condition, use a Hard Reset
(Factory Reset) to initialize it.
1 Turn the power off.
2 Press and hold the Power/Lock Key + Volume Down Key on the right
side of the device until the LG logo is displayed.
3 Briefly release only the Power/Lock Key when the LG logo is displayed.
4 Immediately press and hold the Power/Lock Key again.
5 Release all keys when the Factory reset screen is displayed.
6 Press the Volume Keys to select Yes, and then press the Power/Lock
Key to perform a Hard Reset. Perform this step twice.
WARNING
If you perform a Hard Reset, all user applications, user data and DRM licenses
will be deleted. Please remember to backup any important data before
performing a Hard Reset.
Important Notice 23