[Fp Ttl Auto] - Panasonic Lumix DMW-FL360 Manuel D'utilisation

[FP TTL AUTO]

Press the [MODE] button, and select
the flash mode. (P17)
≥
This mode enables flash photo
taking even at the high shutter
speeds of the digital camera by FP
firing (repeatedly firing the flash at
high speed).
≥
The flash working range is shown
on the display panel in line with the
settings of the digital camera.
A: Flash working range
1 Check that the distance to
the subject is within the
flash working range.
≥
If the subject is outside the range,
adjust the aperture of the lens or
change the distance to the subject.
≥
The flash working range changes
depending on the type and
settings (ISO sensitivity, aperture
and focal length) of the digital
camera used. The range is
narrower than in the [TTL AUTO]
mode.
2 Press the shutter button
all the way down, and take
the photo.
22
VQT1B11
A
3 Check that the [AUTO
CHECK] lamp is flashing.
≥
If the [AUTO CHECK] lamp
continues to flash for about
5 seconds, it means that the unit
has fired successfully. If it does not
flash, the unit has not fired
successfully. Check the settings
on the unit and the digital camera
and then take the picture again.
The following kinds of photos can
be taken using high shutter speeds.
≥
Photo taking with the shadows
softened by backlight photography
≥
Portrait photos taken outdoors with
an open aperture and with the
background defocused
AUTO CHECK