Other Functions; Services; Settings - Krups ESPRESSERIA AUTOMATIC PREMIUM Mode D'emploi

Press the knob from the beverage selection screen to access the machine's other menu functions. Use the rotating
button to browse through menus and options for all settings and validate your choice using the OK button. Press the
button to cancel a choice and go back to the beverage selection menu.
PROG
You can use all the following options to start selected programs. Then follow the instructions on screen

SERVICES

SETTINGS

OTHER FUNCTIONS:

Services
Settings
Machine info
Demo mode
Exit
SERVICES
Rinsing
Cleaning
Water filter
Exit
SETTINGS
Language
Display contrast
Date
Time
Auto-off
Auto-on
Volume unit
Water hardness
Coffee temperature
Exit
KNOB
To access maintenance
To access settings
To access product information
To access demonstration mode
To quit / exit
To access rinsing
To access cleaning
To access filter mode: install, change or
remove your Claris - Aqua Filter System
cartridge
To return to the previous menu
You can select your chosen language from those offered.
You can set screen contrast for better visibility.
You need to set the date, required if using Claris aqua filter.
You can choose between 12 hour or 24 hour time display.
You can choose the period after which your machine will turn
off automatically, from 30 minutes to 4 hours in 30 minute
increments.
You can automatically start pre-heating of your machine at
your chosen time.
Choose either oz or ml as your measurement unit.
You must set your water hardness between 0 and 4. See
"Water hardness measurement" section.
You can set the temperature of your espresso or coffee to one
of three levels.
To return to the previous menu.
12