Amibot Animal Manuel D'utilisation page 13

Operating the robot
Preparing the H2O tank
Note:
• The H2O tank has a maximum capacity of 300ml. For optimum performance, it
must have at least 50ml of liquid.
• For optimum cleaning, check the dilution ratio indicated on the detergent bottle.
• Only use floor cleaner.
• Prolonged use of any other product, such as white vinegar or bleach, could
damage the H2O tank.
Inserting the H2O tank
The vacuum mode stops when the cleaning mode is selected; the
vacuum stops when the robot detects the water compartment.
Clip it to the back of the robot. The robot automatically detects the
water tank thanks to its tank sensor. The robot is ready to start its
cleaning cycle.
NOTE:
• Do not use the H2O tank to clean rugs or carpets.
• The water tank must be removed from the robot before it is charged.
• The dust remaining on the floor is picked up in the part of the tank intended for
the purpose as the central brush rotates.
• To allow vacuum mode to work, please refer to Vacuum Mode (page 10).
Open the H2O tank's refill nozzle and
carefully pour in clean water with some
floor cleaner.
11
EN