EN
Operating the appliance
Plugging in and charging the appliance
Figure 1
Place the handheld vacuum on the floor (Figure 1) or fix it to the wall
mount (Figure 2). For information about installing the wall mount,
see page 11.
While the appliance is being charged, the indicator lights on the
handle start to flash. When the battery is charged the indicator lights
turn off.
When the appliance is in use, the indicator lights turn off one by one
to indicate that the battery is weak.
NOTES:
•
The battery may heat up while charging. If the vacuum temperature goes
above 55°C or below 0°C, the vacuum goes into safety mode until it returns to
a temperature between 0°C and 45°C. During this period, the battery will stop
charging.
•
If the battery temperature exceeds 70°C while the vacuum is in use, the
indicator lights and power light (ON) will flash for 5 seconds. The appliance will
go into safety mode until the temperature reduces to around 65°C.
•
If the vacuum is not used for a long period of time, you are recommended to
fully charge the battery, unplug it and store it in a cool, dry place.
Figure 2
8