Keep It Clean; Cleaning The Body; Cleaning The Underside; Clean The Contact Pins And The Charging Strips - Worx Landroid L WG792E.1 Mode D'emploi

7.2 Keep it Clean

WARNING! Before cleaning turn your Landroid
OFF. Put on protective gloves before cleaning the
Blade Disc (16) and do not use running water. (See Fig. L)
A. Cleaning the Body
®
Your Landroid L will live a much happier and longer life if it is cleaned
regularly. Although, as your Landroid
you will need to take care when cleaning, so DO NOT use a hose,
high pressure washers or otherwise pour running water on your
®
Landroid L, it is best to use a spray bottle filled with water. When
cleaning the machine body use a soft brush or clean cloth and avoid
using solvents or polishes (See Fig. L) .Lastly, make sure that you
remove all build up of grass clippings and debris.
B. Cleaning the Underside
Again, it is important that you power the Landroid
touching the Blade Disc (16).
First, flip your Landroid
and the Front (18) and Drive (11) Wheels. Clean everything thoroughly with a soft brush or moist cloth.
Rotate the Blade Disc to ensure it rotates freely. Check the blades spin freely around the fixing screws. Remove any
obstructions.
IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the
tiniest crack can decrease your Landroid
C. Clean the contact pins and the charging strips
Clean the Contact Pins (2) located on the Charging Base (3) and the Charging Strip (5) located on the Landroid
cloth. Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure
®
the Landroid L successfully charges each time.

7.3 Battery Life

The heart of the Landroid
make sure it is fully charged in kept in a cool dry place between (20°C-60°C).
The life-span of the Landroid
• The time span of the mowing season in your region.
• Amount of hours the Landroid
• Battery maintenance during storage.
®
Landroid L can be charged manually without the boundary wire.
To manually charge the battery without connecting the boundary wire to the charging base;
1. Connect the Charging Base to a suitable power supply.
2. Manually dock the Landroid
3. The charging base red light will turn on.
4. While "charging" is shown on the screen. (See Fig. M2), Landroid
1
M1
Lawn Mowing Robot
®
L is an electric machine,
®
L OFF using the ON/Off Button and wear protective gloves before
®
L upside down to expose its underside. Here you will see the Blade Disc, the Main Housing (14),
®
L's mowing output.
®
L is its 28-volt lithium-ion battery. No maintenance is required. For proper storage of the battery,
®
L 's battery depends on various factors, such as:
®
L mows per day.
®
L into the Charging Base while the Landroid
2
®
L
L
®
L is powered off. (See Fig.M1)
®
L will begin to charge.
M2
®
L using a
13
EN