Indicator For Sms Received On The Heat Pump Or The Boiler; Activation Of Mobile Telephone; Alarm; Change Of Indoor Temperature - CTC SMS-styrning V3 Instructions D'installation Et D'entretien

Indicator for SMS received on the heat pump or the boiler

When the SMS unit is connected to the display card, the text Mo d e m should be visible in
operational data. Any settings in the heat pump or boiler menu system for the SMS module
are not available, and are only confirmed by the text Mo d e m being displayed. On start up,
Mo d e m No is displayed. After one minute, this changes to Mo d e m o k if the modem is
connected to the power pack . The number to the right of the text Mo d e m displays the
number of SMS messages received.

Activation of mobile telephone

Your mobile telephone number must be activated in the SMS module for the SMS module to
be able to receive commands from your mobile phone.
To activate your mobile telephone number, enter the SMS message activatenumber on your
mobile telephone and send it to the SMS module.
NB! Your mobile telephone number must not be a concealed number.
NB! The SMS message is to be sent to the telephone number of the SIM card in the GSM
modem. Use +44 (England) instead of 0.
After the mobile telephone has been activated using the command activatenumber, the text
' Mo d e m O K 1 ' is displayed under Operational data.
Only one mobile telephone can be used for communication with the SMS module. If the user
of the SMS module changes mobile telephone number, the new number must be activated in
the SMS module.
!
Your mobile telephone number is
not to be concealed from the recipient.

Alarm

If an alarm is triggered on the heat pump or the boiler, an SMS text message is sent to the
activated number. The alarm can be reset via the command alarmreset. The SMS module
responds if the alarm is successfully reset.

Change of indoor temperature.

The command indoorXX is used to change indoor temperature. To change indoor
temperature to 22°C, an SMS message with the text indoor22 is sent. NB! No space between
r and the temperature, and use lowercase letters.
O p e ra tio na l d a ta
Mo d e m O K 3
Pro g ra m ID xxxxxx
Pro g ra m d a te xxxxxx
17