Handling; Alignment; Height Adjustment - Boneco F220 Mode D'emploi

HANDLING

HANDLING
All BONECO Air Shower fans are designed for easy han-
dling. The output is adjusted in four levels using a single
control: 0 › I › II › III › IV

ALIGNMENT

The fan unit can be manually tilted 270 degrees.
The fan unit does not rotate a full 360 degrees.
270°

HEIGHT ADJUSTMENT

All electrical components are completely integrated in the
connector. Therefore, you can adjust the height at any
time by adding connector pieces or by pulling sharply to
remove them.
For safety reasons, a maximum of two connector
pieces can be used at once.
9
en