Cleaning And Maintenance - Bimar PA97 Notice D'instructions


To deactivate the device, press the"
switch off the device, remove the plug from the power socket.
When not in use for long periods, the plug must always be removed from the socket.

CLEANING AND MAINTENANCE

Important: before performing routine cleaning, remove the plug from the mains.
 Regularly check that the filters are clean to ensure operation remains as effective as
possible.
 FILTER:
Place the purifier on a horizontal
-
surface covered with a soft cloth,
or another soft surface.
Turn the filter cover anticlockwise
-
in the direction shown by the arrow
- Remove the filter and fit the
new filter in place, taking care
to position it correctly
- Fit the lid onto the base so that the 3
pins are aligned with their respective
slots in the body, and turn fully
clockwise in the direction shown by
the arrow
lock in place with a "click".
 To clean the body, use a soft cloth dampened with water and, if necessary, use also
a mild everyday detergent.
 Do not use abrasive or corrosive products.
 Do not immerse any electrical parts in water or another liquid. In the event this
occurs, dry carefully and check that the electric parts are completely dry. Only
thereafter, plug the appliance into the mains. If in doubt, contact a qualified
professional.
 If the appliance is not used for long periods of time, you should store it away from
dust and moisture; we recommend using the original packaging.
; you will hear it
" button: the "
26/64
" symbol remains on. To