Operating Instructions; Operating Control Panel - Napoleon Lambert NEFB27H Manuel D'installation Et D'opération

WARNING
!
• Ensure the house circuit breakers for the power supply are turned on. When initially connecting the apliance into
a power source, the appliance will perform an LED check. The appliance will flash on and off for 5 seconds.
Once the appliance has been plugged into a grounded electrical outlet, it is ready to operate.
3.1

operating control panel

The Control Panel is located on the top right-hand corner of the
appliance.
POWER
Power
FLAME & EMBER LIGHT
CONTROL
Flame & Ember
Light Control
HEATER CONTROL
Turns the appliance ON/OFF.
TIMER
Controls Flame brightness and the Ember Light.
DECORATIVE LIGHT
5 Settings: Flame & Ember off (FO), Ember on but Flame
(CEFB27/29H ONLY)
Turns the appliance ON/OFF.
Heater
off (LL), small Flame & Ember (F1), medium Flame &
Control
Ember (F2), brightest Flame and Ember (F3).
Controls Flame brightness and the Ember Light.
Turns the Heater and Blower ON/OFF.
5 Settings: Flame & Ember off (FO), Ember on but Flame
F° / C° SWITCH
off (LL), small Flame & Ember (F1), medium Flame &
4 Settings: Heater & Blower off (HO), Blower on (BL), low
Ember (F2), brightest Flame and Ember (F3).
HEATER LOCK
heat (H1), high heat (H2).
Turns the Heater and Blower ON/OFF.
Timer
Timer can be programed to run appliance for specific
TEMPERATURE
lengths of time (30mins. minimum to 6hrs maximum).
4 Settings: Heater & Blower off (HO), Blower on (BL), low
CONTROL
heat (H1), high heat (H2).
R LIGHT
Controls Decorative Light settings.
4 Settings: Decorative Light off (do), white colour (d1),
Timer can be programed to run appliance for specific
auto-cycle from White / Orange / Blue / Orange-Blue /
lengths of time (30mins. minimum to 6hrs maximum). Decorative
White-Orange / White-Blue (d2), lock to desired colour
Light
(d3). It will take 8.5 seconds to switch between colours
Controls Decorative Light settings.
(on d2 setting).
4 Settings: Decorative Light off (do), white colour (d1),
WER
OL
auto-cycle from White / Orange / Blue / Orange-Blue /
To change temperature format, Fahrenheit or Celsius.
White-Orange / White-Blue (d2), lock to desired colour
s
Press and hold the Flame button
ME & EMBER LIGHT
(d3). It will take 8.5 seconds to switch between colours
TROL
(on d2 setting).
Heater button can be locked or unlocked by holding the
Heater button for 5 seconds.
s
Hold 5
To change temperature format, Fahrenheit or Celsius.
POWER
F° / C°
seconds Press and hold the Flame button
Press and hold the Timer button Switch
will change the button to Temperature Control, or vice FLAME & EMBER LIGHT
GHT
Heater button can be locked or unlocked by holding the
TER CONTROL
Hold 5
s
versa. There are 7 temperature settings (61
CONTROL
Heater button
NLY)
seconds
75 F, 81 F, 85 F and OFF)
° ° °
Heater
Press and hold the Timer button
Lock
Hold 5
will change the button to Temperature Control, or vice
seconds
versa. There are 7 temperature settings (61
R
HEATER CONTROL
75 F, 81 F, 85
Temperature ° °
Hold 5
Turns the appliance ON/OFF.
Control
seconds
ORATIVE LIGHT
Controls Flame brightness and the Ember Light.
B27/29H ONLY)
Hold 5
5 Settings: Flame & Ember off (FO), Ember on but Flame
seconds
TIMER
off (LL), small Flame & Ember (F1), medium Flame &
Ember (F2), brightest Flame and Ember (F3).
R LIGHT
Hold 5
DECORATIVE LIGHT
seconds
Turns the Heater and Blower ON/OFF.
WER
C° SWITCH
(CEFB27/29H ONLY)
Turns the appliance on / off.
Controls flame brightness and ember light.
5 Settings:
FO - Flame and ember off
LL - Ember on but flame off
F1 - Small flame and ember
F2 - Medium flame and ember
F3 - Large flame and ember
Turns the heater and blower on / off.
4 Settings:
HO - Heater and blower off
Hold 5
BL - Blower on
seconds
H1 - Low heat
H2 - High heat
Hold 5
seconds
Turns the timer on / off.
Hold 5
Turns the appliance ON/OFF.
seconds
Timer can be programmed to run appliance for specific lengths of time (30 minutes mini-
Controls Flame brightness and the Ember Light.
mum to 6 hours maximum).
5 Settings: Flame & Ember off (FO), Ember on but Flame
Controls decorative light settings.
off (LL), small Flame & Ember (F1), medium Flame &
Ember (F2), brightest Flame and Ember (F3).
4 Settings:
d0 - Decorative light off
Turns the Heater and Blower ON/OFF.
Turns the appliance ON/OFF.
d1 - White colour
d2 - Auto-cycle from white / orange / blue / orange-blue / white-orange / white-blue
4 Settings: Heater & Blower off (HO), Blower on (BL), low
for 5 seconds.
Controls Flame brightness and the Ember Light.
NOTE: It will take 8.5 seconds to switch between colours.
heat (H1), high heat (H2).
d3 - Lock to desired colour
5 Settings: Flame & Ember off (FO), Ember on but Flame
off (LL), small Flame & Ember (F1), medium Flame &
Timer can be programed to run appliance for specific
Turns the appliance ON/OFF.
Controls the temperature format.
lengths of time (30mins. minimum to 6hrs maximum). Ember (F2), brightest Flame and Ember (F3).
for 5 seconds.
for 5 seconds. This
Controls Flame brightness and the Ember Light.
Press and hold the flame button for 5 seconds to switch from °C to °F and vice versa.
Controls Decorative Light settings.
Turns the Heater and Blower ON/OFF.
F, 64 F, 70 F,
4 Settings: Decorative Light off (do), white colour (d1), ° ° °
for 5 seconds.
5 Settings: Flame & Ember off (FO), Ember on but Flame
auto-cycle from White / Orange / Blue / Orange-Blue / 4 Settings: Heater & Blower off (HO), Blower on (BL), low
Heater button can be locked or unlocked by holding the heater button for 5 seconds.
off (LL), small Flame & Ember (F1), medium Flame &
White-Orange / White-Blue (d2), lock to desired colour
heat (H1), high heat (H2).
for 5 seconds. This
Ember (F2), brightest Flame and Ember (F3).
(d3). It will take 8.5 seconds to switch between colours
(on d2 setting).
F, 64
Timer can be programed to run appliance for specific °
Turns the Heater and Blower ON/OFF.
F and OFF)
° lengths of time (30mins. minimum to 6hrs maximum). Controls the temperature.
To change temperature format, Fahrenheit or Celsius.
Press and hold the Flame button 4 Settings: Heater & Blower off (HO), Blower on (BL), low
Controls Decorative Light settings.
Press and hold the timer button for 5 seconds. This will change the button to temperature
heat (H1), high heat (H2).
control or vice versa. 7 temperature settings: 61°F, 64°F, 70°F, 75°F, 81°F, 85°F, and OFF.
4 Settings: Decorative Light off (do), white colour (d1),
Heater button can be locked or unlocked by holding the
auto-cycle from White / Orange / Blue / Orange-Blue /
Heater button for 5 seconds.
Timer can be programed to run appliance for specific
Turns the appliance ON/OFF.
White-Orange / White-Blue (d2), lock to desired colour
lengths of time (30mins. minimum to 6hrs maximum).
(d3). It will take 8.5 seconds to switch between colours
Press and hold the Timer button
Controls Flame brightness and the Ember Light.
(on d2 setting).
will change the button to Temperature Control, or vice
Controls Decorative Light settings.
versa. There are 7 temperature settings (61
4 Settings: Decorative Light off (do), white colour (d1),
5 Settings: Flame & Ember off (FO), Ember on but Flame Hold 5 To change temperature format, Fahrenheit or Celsius.
Turns the appliance ON/OFF.
75 F, 81 F, 85 F and OFF)
° ° ° auto-cycle from White / Orange / Blue / Orange-Blue /
seconds

3.0 operating instructions

Turns the appliance ON/OFF.
Controls Flame brightness and the Ember Light.
5 Settings: Flame & Ember off (FO), Ember on but Flame
off (LL), small Flame & Ember (F1), medium Flame &
Ember (F2), brightest Flame and Ember (F3).
Turns the Heater and Blower ON/OFF.
4 Settings: Heater & Blower off (HO), Blower on (BL), low
heat (H1), high heat (H2).
Timer can be programed to run appliance for specific
lengths of time (30mins. minimum to 6hrs maximum).
Controls Decorative Light settings.
4 Settings: Decorative Light off (do), white colour (d1),
auto-cycle from White / Orange / Blue / Orange-Blue /
White-Orange / White-Blue (d2), lock to desired colour
(d3). It will take 8.5 seconds to switch between colours
(on d2 setting).
To change temperature format, Fahrenheit or Celsius.
Press and hold the Flame button for 5 seconds.
Heater button can be locked or unlocked by holding the
Heater button for 5 seconds.
Press and hold the Timer button for 5 seconds. This
will change the button to Temperature Control, or vice
versa. There are 7 temperature settings (61
75 F, 81 F, 85 F and OFF)
° ° °
F, 70 F,
° °
for 5 seconds.
for 5 seconds. This
F, 64 F, 70 F,
° ° °
NEFB27H illustrated without media console.
F, 64 F, 70 F,
° ° °
W415-1981 / A / 07.20.20
EN
13