SSS Siedle HTV 840-0 Mode D'emploi page 7

The control buttons can be
assigned with different functions
depending on the monitor display.
The functions of the buttons are
indicated by a display superim-
posed at the bottom edge of the
monitor.
Video memory button
If new pictures have been saved,
the door release button lights up at
the telephone. Pressing the Enter
button causes the last saved pic-
ture to be displayed. If the button
is pressed again, the next picture is
displayed.
SD card
At the top of the unit, an addi-
tional SD card can be inserted.
Cards ranging in size from 32 MB
to 2 GB can be used, with capacity
for storing between 32 and 255
pictures depending on the size.
One picture requires around 1 MB
of storage space. The pictures are
saved in *.tif format with a resolu-
tion of 640 x 480 Pixel. The 28 last
pictures are always stored in the
device and on the card. If the card's
memory is full, or the maximum
number of 255 images has been
reached, the oldest image is always
overwritten. If the card is inserted,
the SD card symbol is shown in the
upper line.
The following displays are possible:
SD card correctly detected
Initializing SD card
Card faulty or write protected
Write/Read process
Do not remove the SD card during
the write and read process.
Formatting the SD card should only
ever take place using the relevant
function of the telephone in order
to guarantee the correct file format
(FAT 16).
Using the SD card reader, saved
pictures can be transferred to a
computer and processed.
Main menu
To access the main menu, press
the Enter button and select Menu
at the bottom line of the monitor
using the control button.
7