Princess Black Viper Cyclone Mode D'emploi page 11

Congratulations!
You have purchased a Princess product.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this product for
many years.
Description (fig. A)
Your 332945 Princess vacuum cleaner has
been designed for vacuuming dry substances.
The appliance is not suitable for vacuuming
wet substances. The appliance is suitable for
indoor use only. The appliance is suitable for
domestic use only.
1. On/off button
2. Mains cable rewind button
3. Speed control switch
4. Full indicator
5. Handgrip
6. Dust compartment
7. Release button (dust compartment)
8. Hose
9. Tube
10. Extension tube
11. Airflow control switch
12. Suction nozzle
13. Floor surface selector
14. Wheels
15. Bracket for temporary parking
16. Crevice nozzle
17. Brush nozzle
Assembly
Before you proceed, we need you to pay
attention to the following notes:
- Before assembly, switch off the appliance
and remove the mains plug from the wall
socket.
Mounting and removing the dust
compartment (fig. B)
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without the dust
compartment.
• To remove the dust compartment, keep
the release button (7) pressed and pull the
dust compartment (6) from the appliance.
• To mount the dust compartment, insert
the dust compartment (6) into the
appliance until the release button (7) clicks
into place.
Mounting and removing the hose
(fig. C)
Before you proceed, we would like you to
focus your attention on the following notes:
- Before mounting the hose, make sure that
the dust compartment is inserted into the
appliance.
• To mount the hose (8), insert the hose
outlet (18) into the hose connection (19)
until the release buttons (20) click into
place.
• To remove the hose (8), keep the release
buttons (20) pressed and pull the hose
outlet (18) from the hose connection (19).
Mounting and removing the tube
(fig. D)
• To mount the tube (9), insert the hose inlet
(21) into the tube outlet (22).
• To remove the tube (9), pull the hose inlet
(21) from the tube outlet (22).
Mounting and removing the
accessories (fig. D & E)
Mounting and removing the suction
nozzle (fig. E)
The suction nozzle (12) can be mounted to
the extension tube (10).
• To mount the suction nozzle (12), insert
the tube inlet (23) into the tube connection
(24).
• To remove the suction nozzle (12), pull the
tube inlet (23) from the tube connection
(24).
Mounting and removing the crevice
nozzle (fig. D & E)
The crevice nozzle (16) can be used for
vacuuming in narrow and hard-to-reach places.
11