Steam Funtions - LG DLEX7250 Série Manuel Du Propriétaire

32 OPERATION
Steam Functions
LG's new steam technology allows you to inject
fabrics with a swirling jet of hot steam to refresh
clothes.
Simply select the Steam Fresh™ cycle, or you can
add a steam option to selected cycles.
The Steam Fresh™ Cycle
Steam Fresh™ uses the power of steam to quickly
reduce wrinkles and odor in fabrics. It brings new
life to wrinkled clothes that have been stored for an
extended time and makes heavily wrinkled clothes
easier to iron.
Steam Fresh™ can also be used to help reduce
odors in fabrics.
NOTE
• The TurboSteam option is activated by default
when the Steam Fresh™ or Steam Sanitary™
cycles are selected.
• Depending on the load (quantity of items), you
may change the amount of time for the cycle by
pressing the MORE TIME or LESS TIME button.
The display will show 1, 3, 5, or
or fewer items, 5 is for 4 or 5 items, and indicates
a large load such as a comforter.
Using the Steam Fresh™ Cycle
1 Turn on the dryer and turn the cycle selector
knob to select the Steam Fresh™ cycle.
To add an option function, select TurboSteam, or
2
WRINKLE CARE.
3 Depending on the load (quantity of items), steam
time can be changed by pressing the MORE
TIME or LESS TIME buttons.
4 Press Hold to Start to start the cycle.
Using the steam options:
The Reduce Static option injects steam late in the
drying cycle to reduce the static electricity caused
by dry fabrics rubbing together. Change the amount
of time for the cycle by pressing the More Time or
Less Time button, depending on the load (quantity
of items). The display will show the recommended
number of items, such as 7, 9, 11, 14, 16, or 18.
TurboSteam helps prevent the overdrying of clothes
by injecting steam during the drying process. The
Steam Shield Function extends the life of clothes.
• When Sensor Dry is selected with the Reduce
• The Reduce Static option may also be selected
• After the Steam option is selected in Time Dry, the
• After pressing Start/Pause, the More Time or Less
. 3 means 3
Adding STEAM to a Standard Cycle
1
2
3
4
The Steam Sanitary™ Cycle
The Steam Sanitary™ cycle is ideal for sanitizing
nonwashable items quickly and easily using only
steam.
This cycle is recommended for use with cotton and
polyester materials only. (Do NOT use for urethane
foam, down feathers or delicate items)
NOTE
Static or Turbo Steam option, a Dry level of Less
or Damp cannot be selected.
during Time Dry cycles.
More Time or Less Time buttons will change the
steam time only.
Time buttons will be disabled.
Turn on the dryer and turn the cycle selector
knob to select the Normal, Perm. Press, or
Heavy Duty cycle.
Use the cycle modifier buttons to adjust the
settings for that cycle.
Press the TurboSteam button.
Press START/PAUSE to start the cycle.