Unpacking And Assembly - Oregon PH600 Manuel D'instructions Original

Unpacking and Assembly

Unpacking
WHAT'S IN THE BOX?
The powerhead requires some assembly before
use These items ship with the powerhead:
• Powerhead
• Front handle
• Harness
• Original Instruction Manual
• Charger and power cord (if so equipped)
• Battery (if so equipped)
• Attachment (if so equipped)
After removing the powerhead from the box,
inspect it carefully to ensure no damage has
occurred during shipping and that no parts are
missing If any parts are damaged or missing,
do not use the powerhead Contact Oregon®
Cordless Tool System at 888 313 8665 to obtain
replacement parts or contact your local dealer
Multi-attachment Powerhead
Unpacking and Assembly
Assembly
WARNING: A battery operated tool
with the battery pack inserted can start
accidentally. Remove the battery pack before
assembling or performing maintenance.
ATTACHING THE FRONT HANDLE (FIG. A)
• Loosen and remove the bolt and knob from the
handle
• Install the handle on the powerhead shaft in the
area as illustrated
• Adjust the handle to a comfortable operating
position
• Reinstall the knob and bolt Tighten bolt to
secure
INSTALLING AN ATTACHMENT TO
THE POWERHEAD (FIG. B)
WARNING: Read and understand entire
Original Instruction Manual for each optional
attachment used on this powerhead and
follow all warnings and instructions. Failure
to follow all instructions could result in
electric shock, fire, and/or serious personal
injury.
WARNING: This powerhead is designed
to be used only with the Oregon attachment
models. Use of other attachments could cause
serious personal injuries or property damage.
11