Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.5
ALCOVE FRAMING
NOTE: Recesses or alcoves above the appliance can be made as deep as desired provided the minimum
clearances to combustibles are maintained.
Non-combustible material can be used, provided the minimum clearances to combustible materials are applied
The minimum enclosure volume must be increased by no less than the volume of the recess. This adjustment
can be made by increasing any or all of the height, width and depth of the enclosure.
6.6
REMOTE RECEIVER PLACEMENT
Position the remote receiver in the valve compartment close to the electrical junction box. Ensure the
receiver is on top of the placement label, if equipped.
RECESS OR
ALCOVE
AREA
FIREPLACE BASE
JUNCTION
BOX
PLACE REMOTE
RECEIVER ON TOP
OF THIS LABEL
ENCLOSURE
AREA
APPLIANCE
71.2
35.25
W415-1516 / B / 02.15.17
37
EN
Publicité
Chapitres
Table des Matières
Dépannage
