Important - Baxi luna 3 comfort Notice D'emploi

GB
Summary table of available groups of days
FR
Group Mo– FR "Mo-FR"
Group sa – su "sa-su"
Group Mo – sa "Mo-sa"
Group Mo – su "Mo-su"
(only for boilers connected to an external heater or with
the pre-heat function enabled)
This function enables the programming of four boiler DHW mode
operation time slots in the span of a week (the programmed time slots
are the same for every day of the week).
To set the programming of DHW mode operation
follows:
1) Press the Ip button and then the button
programming (heating and DHW modes);
) Select the DHW programme "HW pR" by repeatedly pressing the
buttons +/- ;
3) Press the oK button
4) Set the time slots in which you can enable DHW mode operation by repeating the operations described in points 4-10
of paragraph 3.6.1 (factory setting 06:00 - 23:00).
programming in DHW

IMpoRtant:

the installer has to set "HW pR" parameter = , as described in section 19 (instructions for the
installer).
BaxI - 95.187.1
Day 1  3 4 5
Day
Day 1  3 4 5 6
Day 1  3 4 5 6 7
3.7 programming dhW mode operation times
MoDe
from Monday to Friday
6 7 Saturday and Sunday
from Monday to Saturday
every day of the week
times, proceed as
to enter the
8
FactoRy settInGs
As per table in
paragraph 3.6.1.
07:00 – 23:00
As per table in
paragraph 3.6.1.
As per table in
paragraph 3.6.1.
pRoGRaMMeD tIMe BanD
09:00 - 1:00
Days of the week
InstRuctIons peRtaInInG to tHe useR