Microsoft Surface Hub de 55 po Guide D'assemblage page 10

Step 3: Remove the lifting handles (Surface Hub 84")
Surface Hub 84" is shipped with the lifting handles already attached. Once the Surface Hub is mounted, remove the handles and keep them in case you ever need to take the Surface Hub off the rolling stand.
A. Remove the screws from the lifting handle mounting bars (see images below).
a. Using a hex key, unscrew the screw that attaches the handle on the right side.
b. Holding onto the right-hand mounting bar, unscrew the screw that attaches the handle on the left side.
c. Set aside and store the handles.
8
Cyan
K