Amibot Animal XL Manuel D'utilisation page 39

Troubleshooting
The appliance
05 is hard to
manoeuvre.
Scheduling
06 does not work
correctly.
The remote
07
control does not
work
If none of the above-mentioned steps provide a solution for your
problem, please contact the AMIBOT after-sales department.
1. The wheels are
jammed.
2. The gap and obstacle
sensors are dirty.
1. The robot is not
switched on.
2. The robot battery is
weak.
3. The dust bin is full.
4. Scheduling has been
cancelled.
1. The batteries are not
inserted or need to be
replaced.
2. The remote control is
broken.
3. The robot is not
switched on.
37
1. Clean the vacuum wheels and
remove the hair and other
debris caught up around
them.
2. Gently clean all of the sensors
on the appliance.
1. Switch the robot on.
2. Recharge the robot before
starting a new cleaning cycle.
3. Remove the dust bin and
empty it before reinserting it.
4. Check the schedule and
reschedule the cleaning cycle,
if necessary.
1. Change the batteries.
2. Replace the remote control for
a new one.
3. Switch the robot on.
EN