Amibot Animal XL Manuel D'utilisation page 12

EN
Operating the appliance
Charging
Assembling the home base
1 m 1 m
2 m
Plug in the home base using the power cable.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 2 m in front of the base and
1 m at either side.
NOTE: When your AMIBOT Animal XL robot is on its home base, make sure that
your robot is switched on and the home base power light is on.
Switching the robot on
Turn the power switch to ON.
"I" is ON and "O" is OFF. The robot is ready to be charged.
10