Amibot Animal XL Manuel D'utilisation page 27

EN
Operating the appliance
Virtual wall
Place the virtual wall at the edge of the two areas you want to
separate. Ensure that the infrared beam is pointing towards a clear
area of the room with the "FORBIDDEN AREA" red indication towards
the area that the robot should not pass. The blue "WORKING AREA"
indication should therefore be on the side of the room that you want
to clean.
Switch on the virtual wall (ON) via the power button. The robot stays
within the virtual wall's boundaries while it is cleaning (no matter the
cleaning mode selected).
NOTE: While the virtual wall is switched on, the power light slowly flashes green.
25