Amibot Animal XL Manuel D'utilisation page 31

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Maintenance
3. The HEPA filter cannot be cleaned, otherwise it would become
damaged. To extend the filter's life, gently shake it outside to
remove any small dust particles that could accumulate. If the
HEPA filter is damaged, you are recommended to replace it to
ensure that your robot's filter performance is maintained.
NOTE: The prefilter (1) must be inserted in the dust bin's filter housing first, followed
by the protection filter (2) and lastly the HEPA filter (3).
H2O tank
After each cleaning cycle, empty the remaining water from the H2O
tank, remove any dust that built up during its cleaning cycle and
then rinse it with clean water. Wait until it is dry before using it again.
Regularly check that the H2O tank's two drip nozzles are not
obstructed by debris or limescale. Clean them with a soft cloth.
29
EN

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières