CPS7500PRO/CPS7500PIE
Scope and User Object
The equipment use in low-voltage TN/IT distribution systems and intended to be installed in any operator
accessible area.
It specifies requirements to ensure safety for the operator and layman who come into contact with the
equipment see above all information (page 1 to page 15).
In general, it does not take into account
– Persons (including children) whose Physical, sensory or mental capabilities; or Lack of experience and
knowledge
Prevents them from using the equipment safely without supervision or instruction;
– Children playing with the equipment.
After installation of EPS castors must be blocked in a way to remove possible movement. Such as
following method:
Step 1. Turn off POWER SW, Output Selector, and the BATTERY SW.
Step 2. Put an appropriate cushion on the bottom in order to fix the EPS and keep steady during
installing.
Step 3. Follow the instruction on the manual and service the battery and AC only allow by trained
personnel.
15
Copyright © 2011 CyberPower Systems, Inc.