System Requirements; Telescope Compatibility - Celestron StarSense AutoAlign Mode D'emploi

SYSTEM REQUIREMENTS

When setting up StarSense for the first time, a
wide-angle/low power eyepiece and high power
eyepiece are recommended . Start with the
wide-angle/low power eyepiece .

TELESCOPE COMPATIBILITY

COMPATIBLE
NexStar SE Series
CPC, CPC DX
NexStar GT (with Aux . splitter)
CGE Pro
Advanced VX Series
CG-5 Computerized (with Aux . splitter)
CGEM, CGEM DX
CGE
NexStar SLT
LCM (with Aux . splitter)
Mounts with only one port for the hand control, such as the CG-5 Computerized Mount, require an Auxiliary
Port Splitter, item #93919, available from Celestron .
6 I
StarSense AutoAlign works with most computerized
Celestron telescopes and several different optical
tubes . Refer to the compatibility charts below .
NOT COMPATIBLE
NexStar i Series
Ultima 2000
Early generation GoTo mounts (such as Compustar)
NexStar GPS