Stid SPECTRE Notice D'installation page 6

SPECTRE Access UHF
Read only & OSDP™
Installation procedure
Mount with 75 x 75 mm / 0.79 x 0.79 in Standard VESA mounting
bracket M4x12 polier screws provided with mounting kit)
The antenna cables have a male connector and a female connector.
To antenna
ANT-SPECTRE-A
for SMA/SLA-x4x
Frequency Band 865 - 868 MHz
Antenna gain 8.30 dBi
Polarization Circular
Axial ratio 0.66
Beamwidth (-3 dB) 70°
Impedance 50 ohms
Cable TNC RP male
Protection IP66
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1127X07 - Page 5 sur 18 - Ed. 28/05/2021
UHF SPECTRE Access
Lecture seule & OSDP™
Notice d'installation
Reader Dimensions (mm / in) - SLA
Mounting – SLA
Two mounting possibilities:
Adjustable wall-mounted kit
(refer to the Installation Procedures
for KFX-UHF-08)
Wall
Antenna Connection - SLA
Antenna Cables SMA / SLA
Antenna Specifications - ANT-SPECTRE
ANT- SPECTRE -B
for SMA/SLA-x5x
902 - 928 MHz
9.68 dBi
Circular
1.16
60°
50 ohms
TNC RP male
IP66
UHF SPECTRE Access
Solo lectura & OSDP™
Manual de instalación
Adjustable pole-mounted kit
(refer to the Installation Procedures
for KFX-UHF-09)
4 serializable cable lengths are available:
1.5 m /4.92 ft:
3 m / 9.84 ft:
9 m / 29.53 ft:
12 m / 39.37 ft:
Only possible combinations:
CAB-SPECTRE-1.5M + CAB-SPECTRE-1.5M
CAB-SPECTRE-1.5M + CAB-SPECTRE-3M
CAB-SPECTRE-1.5M + CAB-SPECTRE-9M
CAB-SPECTRE-3M + CAB-SPECTRE-3M
Label
To module
348.7 / 13.73
45.1 / 1.78
in
US
FR
ES
Pole
CAB-SPECTRE-1.5M
CAB-SPECTRE-3M
CAB-SPECTRE-9M
CAB-SPECTRE-12M